| dc.contributor.author |
Gurrieri, Luis E. |
|
| dc.contributor.author |
Noghanian, S. |
|
| dc.date.accessioned |
2010-10-29T20:07:11Z |
|
| dc.date.available |
2010-10-29T20:07:11Z |
|
| dc.date.created |
2007 |
en |
| dc.date.issued |
2010-10-29T20:07:11Z |
|
| dc.identifier |
IEEE Transactions on Antennas and Propagation, 55(4), 1173–1179, |
en |
| dc.identifier.other |
10.1109/TAP.2007.893380 |
en |
| dc.identifier.uri |
http://hdl.handle.net/10393/19659 |
|
| dc.description.abstract |
The performance of multiple-input multiple-output (MIMO) systems using beam selection is investigated in this paper. Based on the results of a channel sounding campaign carried out at the University of Manitoba for line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios, it was possible to contrast the results of transmitter, receiver and joint beam selection in rich scattering environments. The channel was characterized in the 1-2.4 GHz frequency with a multipath delay resolution better than 5.8 ns. The beam selection was performed by exhaustive search method. The results led us to important conclusions regarding the beam selection procedure and its potential to improve the indoor channel capacity. |
en |
| dc.language.iso |
en |
en |
| dc.subject |
time-domain channel sounding |
en |
| dc.subject |
multi-path channel |
en |
| dc.subject |
information rate |
en |
| dc.subject |
angle |
en |
| dc.subject |
channel sounding |
en |
| dc.subject |
channel capacity |
en |
| dc.subject |
multiple-beam antennas |
en |
| dc.subject |
multi-beam selection |
en |
| dc.subject |
indoor propagation |
en |
| dc.subject |
MIMO systems |
en |
| dc.title |
Multi-Beam Selection for Indoor MIMO Systems: Two Cases of Study |
en |
| dc.type |
article |
en |
